+ Reply to Thread
Page 2 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 16 to 30 of 88

Thread: SWGEmu Launchpad Update - 11/22/13

  1. #16
    Junior Member pyrodan's Avatar
    Join Date
    Jun 2011
    Location
    Southern California
    Posts
    63
    Play Stats
    Inactive
    Downloaded it yesterday as soon as I saw the update about it, have no issues thus far, but glad I saw this just incase, thanks Vlada!

  2. #17
    Junior Member pyrodan's Avatar
    Join Date
    Jun 2011
    Location
    Southern California
    Posts
    63
    Play Stats
    Inactive
    Did find one error though not sure if it is related at all to the new launchpad or not... but after it was installed, ran, and I tried to run it a second time just to make sure that debugger was turned off in my settings, I received a message saying "This application has failed to start because MSVP100.dll was not found. Re-installing the application may fix this problem" Not sure if that means the path to the dll is only temporary and once loaded you have to totally reinstall the launchpad to use it again (which we were told in most cases never use after installed, just the swgemu.exe which btw worked fine) Anyways hopefully helping and not adding to any headaches. lol. thanks again.

  3. #18
    The Vlada Vlada's Avatar
    Join Date
    Mar 2007
    Location
    The Vlada
    Posts
    33,034
    Play Stats
    Inactive
    Quote Originally Posted by pyrodan View Post
    Did find one error though not sure if it is related at all to the new launchpad or not... but after it was installed, ran, and I tried to run it a second time just to make sure that debugger was turned off in my settings, I received a message saying "This application has failed to start because MSVP100.dll was not found. Re-installing the application may fix this problem" Not sure if that means the path to the dll is only temporary and once loaded you have to totally reinstall the launchpad to use it again (which we were told in most cases never use after installed, just the swgemu.exe which btw worked fine) Anyways hopefully helping and not adding to any headaches. lol. thanks again.
    That error means there is an issue with Visual C++ 2010 or that its missing. You should reinstall that.

  4. #19
    Newbie
    Join Date
    Jun 2012
    Location
    North Carolina
    Posts
    4
    Play Stats
    Inactive
    Dang completely missed the New launch pad. Oh well, sorry hope I didn't come across as an A**.

  5. #20
    Junior Member pyrodan's Avatar
    Join Date
    Jun 2011
    Location
    Southern California
    Posts
    63
    Play Stats
    Inactive
    Will do that, dunno how that occurred but i'll get on it. Seem not only to happen with the launchpad restart, but also affects a second instance from the swgemu.exe as well. thanks for the answer! Have a great weekend!
    _________________

    Update: 4:29 Pac:
    Reinstalled the C++ 2010. New dll error dpvs.dll was not found. Tried to start from launchpad, worked fine for two instances. Direct launch from swgemu.exe is the problem for me, ATM. Later will see about restarting computer and reloading it from .exe to see if it resolves itself.
    Last edited by pyrodan; 11-22-2013 at 11:30 PM.

  6. #21
    Junior Member excalibur77's Avatar
    Join Date
    May 2011
    Location
    IL
    Posts
    189
    Play Stats
    Inactive
    would we still be able to use the old enhanced launchpad or do we need to DL the new one?

  7. #22
    SWGEmu Retired Forum Moderator Ellyssia's Avatar
    Join Date
    Aug 2009
    Location
    I'm around
    Posts
    4,045
    Play Stats
    Inactive
    Support for the old one will be discontinued in about a month.
    Ellyssia
    Forum Moderator

    SWGEmu is a non-profit, open source community project.
    How to report bugs | Mantis (Bug Tracker) | Live Support
    Install SWGEmu | Fix SWGEmu | Submit a ticket

  8. #23
    The Vlada Vlada's Avatar
    Join Date
    Mar 2007
    Location
    The Vlada
    Posts
    33,034
    Play Stats
    Inactive
    Quote Originally Posted by pyrodan View Post
    Will do that, dunno how that occurred but i'll get on it. Seem not only to happen with the launchpad restart, but also affects a second instance from the swgemu.exe as well. thanks for the answer! Have a great weekend!
    _________________

    Update: 4:29 Pac:
    Reinstalled the C++ 2010. New dll error dpvs.dll was not found. Tried to start from launchpad, worked fine for two instances. Direct launch from swgemu.exe is the problem for me, ATM. Later will see about restarting computer and reloading it from .exe to see if it resolves itself.
    Are you using Trend Micro or Norton by any chance? Those two tend to block and quarantine dpvs.dll.

  9. #24
    Junior Member pyrodan's Avatar
    Join Date
    Jun 2011
    Location
    Southern California
    Posts
    63
    Play Stats
    Inactive
    Nope. (Security essentials from MS) I went to see if it was quarantined, blocked or anything else, nothing there. Never had the issue until yesterday. As long as I use the launchpad to launch the game it works, fine, it's only when I started using the exe did it start doing the .dll garbage. *Scratches chin* I'll look into my folders, see where I'm originating from as far as the executable. Thanks for your help.

  10. #25
    The Vlada Vlada's Avatar
    Join Date
    Mar 2007
    Location
    The Vlada
    Posts
    33,034
    Play Stats
    Inactive
    Use the new Launchpad

  11. #26
    SWGEmu Retired Community Relations bigevil's Avatar
    Join Date
    Aug 2008
    Location
    A Moonlit Grove....
    Posts
    6,611
    Play Stats
    Inactive
    Yep. Uninstalled the LPE, followed guide and all is well. Smooth. Nice job team!
    Retired Community Relations

    SWGEmu is a non-profit, open source community project.
    Is what I am doing in the game wrong? How do I know? If in doubt, contact Staff.

    SWGEmu Guides and Helpful Links / complaint@swgemu.com for violations or complaints / LIVE Support

  12. #27
    Junior Member pyrodan's Avatar
    Join Date
    Jun 2011
    Location
    Southern California
    Posts
    63
    Play Stats
    Inactive
    It didn't start til I started using the new launchpad lol. Unless, I'm mistaken and you're saying "Only use the launchpad to start the game from now on" which from what I saw from other posts was to only use it the first time. (Mistaken possibly, but that is what I have been doing since the problem started lol --- and so far it's the only thing working.) So if that is what you meant, case closed and I am. Thanks Hope you all have a great weekend!

  13. #28
    The Vlada Vlada's Avatar
    Join Date
    Mar 2007
    Location
    The Vlada
    Posts
    33,034
    Play Stats
    Inactive
    Here are your options:

    1. You can use the old LPE (not recomened, we will stop offering support for i in a few weeks)
    2. You can use swgemu.exe from the old SWGEmu client installed with LPE (Again since it is an LPE based cleint we will stop offering support for i in a few weeks, so not recomended)
    3. You can use our New SWGEmu Launchpad <--- Recomended
    4. You can use swgemu.exe from the new SWGEmu client installed with our new Launchpad (not recomended)

  14. #29
    Dedicated MrObvious's Avatar
    Join Date
    Jul 2013
    Location
    Arizona
    Posts
    700
    Play Stats
    Inactive
    I assume the new SMGEMU Client from the new Launchpad breaks all mods? 60 FPS, etc? Any recommendations on using those with the new process?
    MrObvious
    SWG Infinity

  15. #30
    The Vlada Vlada's Avatar
    Join Date
    Mar 2007
    Location
    The Vlada
    Posts
    33,034
    Play Stats
    Inactive
    Quote Originally Posted by MrObvious View Post
    I assume the new SMGEMU Client from the new Launchpad breaks all mods? 60 FPS, etc? Any recommendations on using those with the new process?
    Game cleints are almost exactly the same, any mods you used before you should be able to use now.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts