I wrote this kinda fast, a spelling errors, but the macro it self is prefect :=D
do not stand near a crafting station when you do this!
This macro is the shiznit for grinding!
Ok to do this you will be useing the top row of F1 - F12 keys in the "first set" of your toolbar quickslots. Very importain to make sure it is the "first set" or it will not work.
You will have to make 3 macros. Pick a name for the macros - i used, 'wsmacro1' 'wsmacro2' 'dump' . You can use what ever you like.
Open the abilities window (Ctrl - a) then hit the macro tab. Hit new macro and give it a name. Then pick an icon for the macro. The icons mean nothing, they are just there to use as a pic to put in the toolbar quickslot.
Write this macro:
/ui action toolbarSlot03;
/selectDraftSchematic 57; <----- This number will diferent for you!
/pause 5; (This is where you double click to put in resources)
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot04;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot05;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot06;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot01; <--- this loops the macro
review the macro for spelling. Then hit 'ok' this will save the macro
Now hit new macro an give it a name and pick an icon (diferent one) then write this macro:
/ui action toolbarSlot07;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot08;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot09;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot10;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot11;
/selectDraftSchematic 57;
/pause 5;
/nextcraftingstage;
/nextcraftingstage;
/createprototype practice no item;
/createprototype practice no item;
/pause 1;
/ui action toolbarSlot00; (This calls Macro#1)
<-- this loops back to the first macro makeing this endless
save it.
now this is a endless macro so you will need a way to stop it. write this macro pick and icon and save it:
/dump
Ok now put macro#1 in F1 toolbar slot
put macro#2 in F2 toolbar slot
put the end macro in F3 toolbar slot
You will need 8 crafting stations now
put the crafting stations in F5,F6,F7,F8,F9,F10,F11,F12 toolbar slots.
now try the macro.
You can make this faster by changing the pause ( /pause 5; ) to 3 or 4 seconds.
*Caution* useing the 3 second pause is really hard, you will not beable to take your eyes off the screen. It is really fast but bruns you out fast.
I was useing this to make metal staffs.
You can use this to make about anything.
The /pause is the time the macro stops for you to load the resorces in the crafting station.
select draft schematic number can be found by useing Ctrl - d to open your data pad then hit the data tab. count the number of schematic in the data pad left to right & top to bottom. I counted down and 57 was the number where my metal stall schematic was.
Good luck.
This will cut your grinding time in half!
By, TY-GUY1
|